Loading...
2 results
Search Results
Now showing 1 - 2 of 2
- Plastic rotation capacity of lightweight-aggregate concrete beamsPublication . Bernardo, Luís; Nepomuceno, Miguel; Pinto, HugoThis article describes a study on the plastic behaviour of lightweight-aggregate concrete beams. The experimental results of nineteen simply supported beams previously tested by the authors were used in this study. The experimental plastic rotation capacity of the tested beams was characterized by a parameter called Plastic Trend Parameter (PTP). The main variables studied were the concrete compressive strength and the longitudinal tensile reinforcement ratio. It was found that plastic rotation capacity slightly increases as the concrete compressive strength increases. An appropriate range for the longitudinal tensile reinforcement ratio to ensure plastic rotation capacity is proposed. The results of this study were also compared with the requirements from some codes of practice. From this analysis, it was shown that ACI Code requirements give more guaranties as far as plastic rotation capacity is concerned, when compared with European codes.
- Flexural ductility of lightweight-aggregate concrete beamsPublication . Bernardo, Luís; Nepomuceno, Miguel; Pinto, HugoThis paper describes an experimental study on the flexural ductility of lightweight-aggregate concrete beams including concretes with compressive strengths between 22.0 and 60.4 MPa and dry densities between 1651 and 1953 kg/m3. Nineteen simply supported beams were tested until failure. Two symmetrical concentrated loads were applied at approximately one third of the span. Ductility was studied by defining ductility indexes. The main variables are the concrete compressive strength and the longitudinal tensile reinforcement ratio. It is shown that the parameter with higher influence on ductility is the longitudinal tensile reinforcement ratio. The test results are also compared with the requirements from some codes of practice. It is shown that ACI Code requirements give more guaranties as far as ductility is concerned, when compared with European codes.