Loading...
3 results
Search Results
Now showing 1 - 3 of 3
- Ensaios não destrutivos em betãoPublication . Nepomuceno, MiguelNo presente trabalho são passados em revista os principais métodos de ensaio não destrutivos, destinados a avaliar as diferentes propriedades do betão “in situ” e são tecidas a este respeito algumas considerações de âmbito geral. Segue-se uma extensa revisão bibliográfica, retratando o atual estado do conhecimento de um conjunto de ensaios não destrutivos selecionados por terem uma vasta aplicação em betões da gama de resistência normal e/ou por serem fáceis de operar e relativamente económicos ao ponto de justificar a sua aplicação corrente. Os ensaios estudados no presente trabalho são os seguintes: o ensaio de dureza superficial, utilizando o esclerómetro de Schmidt Tipo N; o ensaio de medição da velocidade de propagação de ultrassons, utilizando o aparelho “Pundit”; o ensaio da resistência à penetração, utilizando a Pistola de Windsor e uma Máquina Alternativa de Ensaio (testada para este efeito pela primeira vez); o ensaio da força de arranque, utilizando o sistema “Capo-test” e, ainda, o ensaio da tensão de tração direta, utilizando o sistema “Bond-test”. À revisão bibliográfica segue-se a descrição de um programa de ensaios experimental, que inclui: a aplicação de todos os ensaios acima listados em 11 lajes com betões de resistências à compressão que variaram desde os 17 MPa até aos 82 MPa; o ensaio à compressão de cubos de 150 mm de aresta curados juntamente com as lajes; a estimativa da resistência equivalente em cubos obtida de carotes extraídas dessas lajes e, ainda, o ensaio à compressão aos 28 dias de cubos padrão sujeitos a cura normalizada. A variabilidade dos próprios ensaios é avaliada em pormenor; são apresentadas as correlações obtidas com a resistência à compressão; são avaliados e apresentados os limites de confiança de 95% para essas correlações; são discutidos os resultados obtidos, comparando-os com trabalhos similares observados na bibliografia consultada. Finalmente, são apresentadas as conclusões finais e sugeridos futuros trabalhos nesta área.
- Evaluation of In-place Concrete Strength by Near-to-surface TestsPublication . Lopes, Sérgio Manuel Rodrigues; Nepomuceno, MiguelThe near-to-surface tests, as described by British Standard BS 1881: Part 207: 1992, comprises different techniques which were developed to evaluate in-situ strength of concrete, and it includes: internal fracture, pull-out, pull-off, penetration resistance and break-off tests. Since these tests measure only a property of concrete close to the surface, the evaluation of in-situ strength of concrete mass has to be obtain by a experimentally correlation between the near-to surface test results and the compressive strength of concrete mass. This paper discusses the reliability of two of this techniques, penetration resistance test and pull-out tests, as a construction tool for the evaluation of the in-place concrete strength both in normal and high strength concrete. For penetration resistance test applied to high-strength concrete an alternative firing apparatus to the standard apparatus, Windsor Probe Test System, is used. The obtained correlations are also presented and compared to those obtain by other research works.
- Evaluation of Self-Compacting Concrete Strength with Non-Destructive Tests for Concrete StructuresPublication . Nepomuceno, Miguel; Bernardo, LuísSelf-compacting concrete (SCC) shows to have some specificities when compared to normal vibrated concrete (NVC), namely higher cement paste dosage and smaller volume of coarse aggregates. In addition, the maximum size of coarse aggregates is also reduced in SCC to prevent blocking effect. Such specificities are likely to affect the results of non-destructive tests when compared to those obtained in NVC with similar compressive strength and materials. This study evaluates the applicability of some non-destructive tests to estimate the compressive strength of SCC. Selected tests included the ultrasonic pulse velocity test (PUNDIT), the surface hardness test (Schmidt rebound hammer type N), the pull-out test (Lok-test), and the concrete maturity test (COMA-meter). Seven sets of SCC specimens were produced in the laboratory from a single mixture and subjected to standard curing. The tests were applied at different ages, namely: 1, 2, 3, 7, 14, 28, and 94 days. The concrete compressive strength ranged from 45 MPa (at 24 h) to 97 MPa (at 94 days). Correlations were established between the non-destructive test results and the concrete compressive strength. A test variability analysis was performed and the 95% confidence limits for the obtained correlations were computed. The obtained results for SCC showed good correlations between the concrete compressive strength and the non-destructive tests results, although some differences exist when compared to the correlations obtained for NVC.