Loading...
3 results
Search Results
Now showing 1 - 3 of 3
- Smart Textiles for Strengthening of StructuresPublication . Górski, Marcin; Krzywoń, Rafał; Dawczyński, Szymon; Szojda, Leszek; Salvado, Rita; Lopes, Catarina; Araújo, Pedro; Velez, Fernando J.; Gomes, João CastroThis paper presents results of mechanical tests on a prototype of an innovative structural strengthening in form of self-monitoring fabric. Smart textile employs carbon fibers conductivity for measuring strains while monitoring changes of electric resistance under increasing load. A general solution was tested in a series of calibrating tests on strengthening of small size concrete slabs. Promising results of simple specimen, has encouraged the research team to perform the next tests using mastered carbon fibre reinforced fabric. Main tests were performed on natural scale RC beam. Smart textile proved its efficiency in both: strengthening and monitoring of strains during load increase. New strengthening proposal was given 10% increase of loading capacity and the readings of strain changes were similar to those obtained in classical methods. In order to calibrate the prototype and to define range limits of solution usability, textile sensor was tested in areas of large deformations (timber beam) and as well as very small strains (bridge bearing block). In both cases, the prototype demonstrated excellent performance in the range of importance for structural engineering. This paper also presents an example of use of the smart strengthening in situ, in a real life conditions.
- Carbon Fiber Epoxy Composites for Both Strengthening and Health Monitoring of StructuresPublication . Salvado, Rita; Lopes, Catarina; Szojda, Leszek; Araújo, Pedro; Górski, Marcin; Velez, Fernando J.; Castro-Gomes, João; Krzywon, RafalThis paper presents a study of the electrical and mechanical behavior of several continuous carbon fibers epoxy composites for both strengthening and monitoring of structures. In these composites, the arrangement of fibers was deliberately diversified to test and understand the ability of the composites for self-sensing low strains. Composites with different arrangements of fibers and textile weaves, mainly unidirectional continuous carbon reinforced composites, were tested at the dynamometer. A two-probe method was considered to measure the relative electrical resistance of these composites during loading. The measured relative electrical resistance includes volume and contact electrical resistances. For all tested specimens, it increases with an increase in tensile strain, at low strain values. This is explained by the improved alignment of fibers and resulting reduction of the number of possible contacts between fibers during loading, increasing as a consequence the contact electrical resistance of the composite. Laboratory tests on strengthening of structural elements were also performed, making hand-made composites by the “wet process”, which is commonly used in civil engineering for the strengthening of all types of structures in-situ. Results show that the woven epoxy composite, used for strengthening of concrete elements is also able to sense low deformations, below 1%. Moreover, results clearly show that this textile sensor also improves the mechanical work of the strengthened structural elements, increasing their bearing capacity. Finally, the set of obtained results supports the concept of a textile fabric capable of both structural upgrade and self-monitoring of structures, especially large structures of difficult access and needing constant, sometimes very expensive, health monitoring.
- Developing Sustainable Communication Interfaces Through Fashion DesignPublication . Loss, Caroline; Salvado, Rita; Lopes, Catarina; Pinho, Pedro; Gonçalves, Ricardo; Velez, Fernando J.; Saraiva, Henrique Morais; Tavares, Jorge; Barroca, Norberto; Borges, Luís M.The recent technological developments made electronic devices become imperative and indispensable, being present in our daily routines, all over the world. But, the continuous exposition of people to the electromagnetic radiation might cause illness. Electrosmog is the invisible electromagnetic radiation that results from the usage of electric equipment and wireless technologies. Some studies present electro sensibility as a contemporary illness affecting more and more people. This paper analyses some of the challenges this reality puts to the fashion design and how textile materials may be used to protect the human body against the harmful radiation and to develop smart cloths incorporating textile antennas able to capture these radiations and feed low-frequency devices. Thus, one considers the notion of “Transparent Sustainability” and the search for the smart energy explorations of/or in the human body. This way, the association of fashion design and technology can transform the garment in a sustainable communication interface.