Loading...
3 results
Search Results
Now showing 1 - 3 of 3
- Performance enhancement of IEEE 802.15.4 by employing RTS/CTS and frame concatenationPublication . Barroca, Norberto; Velez, Fernando J.; Borges, Luís M.; Chatzimisios, PeriklisIEEE 802.15.4 has been widely accepted as the de facto standard for wireless sensor networks (WSNs). However, as in their current solutions for medium access control (MAC) sub-layer protocols, channel efficiency has a margin for improvement, in this study, the authors evaluate the IEEE 802.15.4 MAC sub-layer performance by proposing to use the request-/clear-to-send (RTS/CTS) combined with frame concatenation and block acknowledgement (BACK) mechanism to optimise the channel use. The proposed solutions are studied in a distributed scenario with single-destination and single-rate frame aggregation. The throughput and delay performance is mathematically derived under channel environments without/with transmission errors for both the chirp spread spectrum and direct sequence spread spectrum physical layers for the 2.4 GHz Industrial, Scientific and Medical band. Simulation results successfully verify the authors’ proposed analytical model. For more than seven TX (aggregated frames) all the MAC sub-layer protocols employing RTS/CTS with frame concatenation (including sensor BACK MAC) allow for optimising channel use in WSNs, corresponding to 18–74% improvement in the maximum average throughput and minimum average delay, together with 3.3–14.1% decrease in energy consumption.
- Block acknowledgment in IEEE 802.15.4 by employing DSSS and CSS PHY layersPublication . Barroca, Norberto; Borges, Luís M.; Velez, Fernando J.; Chatzimisios, PeriklisThe IEEE 802.15.4 standard has been widely accepted as the de facto standard for Wireless Sensor Networks (WSNs), since it provides ultra-low complexity, cost and energy consumption for low-data rate wireless connectivity. However, one of the fundamental reasons for the IEEE 802.15.4 Medium Access Control (MAC) inefficiency is overhead. In the context of our research, we demonstrate that WSNs may benefit from packet concatenation. In this paper we introduce and study the employment of a block acknowledgment mechanisms in order to achieve enhanced channel efficiency in IEEE 802.15.4 nonbeacon-enabled networks for both the Chirp Spread Spectrum (CSS) and Direct Sequence Spread Spectrum (DSSS) Physical (PHY) layers for the 2.4 Industrial, Scientific and Medical (ISM) frequency band. The proposal of the two new innovative MAC sublayer mechanisms can also be considered as a future possible contribution to the standard itself. The throughput and delay performance is mathematically derived under ideal conditions, (i.e., a channel environment without transmission errors). The performance of the proposed schemes is compared against the IEEE 802.15.4 standard through extensive simulations by employing the OMNeT++ simulator. We demonstrate that, for both PHY layers, the network performance is significantly improved in terms of throughput, end-to-end delay and bandwidth efficiency.
- IEEE 802.15.4 MAC layer performance enhancement by employing RTS/CTS combined with packet concatenationPublication . Barroca, Norberto; Borges, Luís M.; Velez, Fernando J.; Chatzimisios, PeriklisIEEE 802.15.4 Medium Access Control (MAC) layer does not include the Request-To-Send/Clear-To-Send (RTS/CTS) handshake mechanism, in order to overcome the hidden node problem that affects Wireless Sensor Networks (WSNs). In this paper we propose and analyse the use of RTS/CTS in IEEE 802.15.4 for the nonbeacon-enable mode. The proposed solution shows that by considering the RTS/CTS mechanism combined with packet concatenation we improve the network performance in terms of maximum throughput, minimum delay and bandwidth effciency. In IEEE 802.15.4 with RTS/CTS, the backoff procedure process is not repeated for each data packet sent unlike the basic access mode of IEEE 802.15.4, but only for each RTS/CTS set. Therefore, the channel utilization is maximized by decreasing the deferral time period before transmitting a data packet. Our work introduces an analytical model capable of accounting the retransmission delay and the maximum number of backoff stages. The successful validation of our analytical model is carried out by comparison against simulation results by using the OMNeT++ simulator.