Loading...
2 results
Search Results
Now showing 1 - 2 of 2
- Effect of Polymer Dissolution Temperature and Conditioning Time on the Morphological and Physicochemical Characteristics of Poly(Vinylidene Fluoride) Membranes Prepared by Non-Solvent Induced Phase SeparationPublication . Cardoso, V. F.; Botelho, Gabriela; Morão, António; Nunes-Pereira, João; Lanceros-Mendez, SenentxuThis work reports on the production of poly(vinylidene fluoride) (PVDF) membranes by non-solvent induced phase separation (NIPS) using N,N-dimethylformamide (DMF) as solvent and water as non-solvent. The influence of the processing conditions in the morphology, surface characteristics, structure, thermal and mechanical properties were evaluated for polymer dissolution temperatures between 25 and 150 C and conditioning time between 0 and 10 min. Finger-like pore morphology was obtained for all membranes and increasing the polymer dissolution temperature led to an increase in the average pore size ( 0.9 and 2.1 m), porosity ( 50 to 90%) and water contact angle (up to 80 ), in turn decreasing the PVDF content ( 67 to 20%) with the degree of crystallinity remaining approximately constant ( 56%). The conditioning time did not significantly affect the polymer properties studied. Thus, the control of NIPS parameters proved to be suitable for tailoring PVDF membrane properties.
- Evaluation of the Physicochemical Properties and Active Response of Piezoelectric Poly(vinylidene fluoride-co-trifluoroethylene) as a Function of Its MicrostructurePublication . Gonçalves, R.; Cardoso, V. F.; Pereira, Nelson; Oliveira, Juliana; Nunes-Pereira, João; Costa, C. M.; Lanceros-Mendez, SenentxuPoly(vinylidene fluoride-trifluoroethylene), P(VDF-TrFE), microstructures have been produced using different solvents, including green ones, by different techniques, such as solvent casting, screen-printing, replica molding, electrospray, and electrospinning. The obtained microstructures span from simple porous and dense films to spheres, fibers, and patterned three-dimensional architectures, with no significant variation in their physicochemical and electrical properties. The simplicity, low cost, and reproducibility of the processing techniques allied to their versatility to adapt to other materials to produce controlled and tailored microstructures with specific properties demonstrate their potential in a wide range of technological applications, including biomedical, energy storage, sensors and actuators, and filtration.