Name: | Description: | Size: | Format: | |
---|---|---|---|---|
3.6 MB | Adobe PDF |
Authors
Advisor(s)
Abstract(s)
Neste trabalho é analisado o comportamento de uma viga de betão armado (viga de
referência A2 de Bernardo em 2003), com secção transversal retangular vazada, sujeita à
torção pura até à rotura. Para tal é realizada uma análise não linear com elementos finitos,
recorrendo ao software comercial ABAQUS. O estudo realizado tem como objetivo explicar
não só a metodologia utilizada para a modelação da viga de referência A2 mas também
interpretar toda a informação teórica necessária e subjacente à utilização do software
ABAQUS para os propósitos deste trabalho. É executada uma análise para averiguar qual o
melhor modelo de rotura para a caracterização do betão.
Com vista a descrever o comportamento da viga de referência sujeita à torção, foi
necessário interpretar, para além de toda a informação relativa ao ensaio experimental
realizado por Bernardo em 2003, também as fases antecedentes e subsequentes relativas ao
ensaio realizado. Assim, tendo por base este estudo, e para a definição do comportamento
não linear do betão, numa primeira fase adotaram-se as leis constitutivas presentes no
Eurocódigo 2, com ajustes aos modelos de rotura dos materiais assumidos pelo ABAQUS.
Posteriormente adotou-se toda a informação característica para um betão similar ao utilizado
na viga de referência, adequadamente caracterizado na bibliografia.
Com vista a descrever de forma simplificada todo o procedimento executado neste
trabalho, é interpretado e descrito detalhadamente todo o processo teórico e apresentada a
modelação da viga de referência A2. A modelação apresentada é descrita nas três fases
essenciais à criação do modelo para simulação do problema, designadamente o préprocessamento,
processamento e pós-processamento. [...]
In this work the behavior of a reinforced concrete beam (reference beam A2 inform Bernardo in 2003) is analyzed), with rectangular cross-section hollow and subject to pure torsion until failure. For this, a non-linear finite element analysis, by using the commercial ABAQUS software, is carried out. This work aims to explain not only the methodology used to model the reference beam A2 but also to interpret all the necessary and underlying theoretical information to use ABAQUS for the purposes of this study. An analysis to determine what the best damage model for concrete is also performed. In order to model the behavior of the reference beam A2 under torsion, it was necessary to interpret, in addition to all the experimental data presented by Bernardo in 2003, also the background and test setup for the performed test. Based on this information, to define the nonlinear behavior of concrete, it wasinitially adopted the constitutive laws from Eurocode 2, with some adjustments in order to be used in the failure modelinto ABAQUS. Later, reported appropriate information found in the literature for a similar concrete was also used. In order to simply describe the entire procedure performed in this work, do model the reference beam, some theoretical informations is interpreted and presented in detail. The performed modelling is described for the three stages used, namely the pre-processing, processing and post-processing stage. [...]
In this work the behavior of a reinforced concrete beam (reference beam A2 inform Bernardo in 2003) is analyzed), with rectangular cross-section hollow and subject to pure torsion until failure. For this, a non-linear finite element analysis, by using the commercial ABAQUS software, is carried out. This work aims to explain not only the methodology used to model the reference beam A2 but also to interpret all the necessary and underlying theoretical information to use ABAQUS for the purposes of this study. An analysis to determine what the best damage model for concrete is also performed. In order to model the behavior of the reference beam A2 under torsion, it was necessary to interpret, in addition to all the experimental data presented by Bernardo in 2003, also the background and test setup for the performed test. Based on this information, to define the nonlinear behavior of concrete, it wasinitially adopted the constitutive laws from Eurocode 2, with some adjustments in order to be used in the failure modelinto ABAQUS. Later, reported appropriate information found in the literature for a similar concrete was also used. In order to simply describe the entire procedure performed in this work, do model the reference beam, some theoretical informations is interpreted and presented in detail. The performed modelling is described for the three stages used, namely the pre-processing, processing and post-processing stage. [...]
Description
Keywords
Abaqus Análise Não Linear Betão Armado Elementos Finitos Torção Viga