Loading...
7 results
Search Results
Now showing 1 - 7 of 7
- Surface modification of an intraocular lens material by plasma-assisted grafting with 2-hydroxyethyl methacrylate (HEMA), for controlled release of moxifloxacinPublication . Vieira, Ana Paula; Pimenta, Andreia; Silva, Diana; Gil, Maria; Alves, Patrícia; Coimbra, Patrícia; Mata, Jose; Bozukova, Dimitriya; Correia, Tiago R.; Correia, Ilídio Joaquim Sobreira; Serro, Ana Paula; Guiomar, AntónioEndophthalmitis, an inflammation of the eye due to perioperative infection, may occur after cataract surgery. Intraocular lenses (IOLs) loaded with an antibiotic have been proposed as an alternative to the conventional postoperative endophthalmitis prophylaxis, since the antibiotic is delivered directly to the target site. In this work, an IOL-based antibiotic releasing system was prepared from a copolymer used in the production of IOLs and a fluoroquinolone used in endophthalmitis prophylaxis (moxifloxacin, MFX). Argon plasma-assisted grafting with 2-hydroxyethyl methacrylate (HEMA) in the presence of MFX was the approach selected for surface modification, with MFX loaded both by entrapment in the grafted polyHEMA coating and by soaking. Surface and bulk properties were evaluated before and after surface modification and the MFX release profiles were obtained both in batch mode (sink conditions) and under hydrodynamic conditions, employing a purpose-built microfluidic cell, which simulated the hydrodynamic conditions around the eye lens. The effect of storage on the release profile of the best system was also assessed. The best system released MFX for ca. 15 days above the minimum inhibitory concentration for Staphylococcus aureus and Staphylococcus epidermidis. The released MFX showed antimicrobial activity against these bacteria and was non-cytotoxic against corneal endothelial cells.
- Coaxial electrospun PCL/Gelatin-MA fibers as scaffolds for vascular tissue engineeringPublication . Coimbra, Patrícia; Santos, Patrícia; Alves, Patrícia; Miguel, Sónia P.; Carvalho, Marco António Paulo de; Sá, Kevin; Correia, Ilídio Joaquim Sobreira; Ferreira, PaulaCoaxial electrospinning is a technique that allows the production of nanofibers with a core–shell structure. Such fibers present several advantages as materials for the preparation of scaffolds, namely due to the possibility of combining a core with the desired mechanical properties with a shell prepared from biocompatible materials that will establish proper interactions with the host. Herein, core-shell fibrous meshes, composed of a polycaprolactone (PCL) core and a functionalized gelatin shell, were prepared by coaxial electrospinning and then photocrosslinked under UV light aiming to be used in vascular tissue regeneration. The suitability of the meshes for the pretended biomedical application was evaluated by assessing their chemical/physical properties as well as their haemo and biocompatibility in vitro. The obtained results revealed that meshes’ shell prepared with a higher content of gelatin showed fibers with diameters presenting a unimodal distribution and a mean value of 600 nm. Moreover, those fibers with higher content of gelatin also displayed lower water contact angles, and therefore higher hydrophilicities. Such features are crucial for the good biologic performance displayed by these meshes, when in contact with blood and with Normal Human Dermal Fibroblasts cells.
- Photocrosslinkable electrospun fiber meshes for tissue engineering applicationsPublication . Ferreira, Paula; Santos, Patrícia; Alves, P.; Carvalho, Marco António Paulo de; Sá, Kevin; Miguel, Sónia P.; Correia, Ilídio Joaquim Sobreira; Coimbra, Patrícia Manuela AlmeidaElectrospun polymeric meshes are known to exhibit promising properties for the regeneration of several soft tissues. Herein, electrospun polymeric meshes were prepared from blends of polycaprolactone and functionalized gelatin. The meshes were then photocrosslinked under UV light using Irgacure® 2959 as the photoinitiator, aiming to improve membranes’ stability in biological fluids. Moreover, meshes suitability to be used as vascular grafts was evaluated by characterizing their chemical/physical properties as well as their haemo and biocompatibility in vitro. The obtained results show that the blended polymeric meshes are biodegradable and those with a higher content of gelatin display a lower water contact angle. Blood compatibility studies showed that the photocrosslinked membranes are haemocompatible, i.e. they display low values of thrombogenicity and do not trigger any haemolytic effect. Also, Normal Human Dermal Fibroblasts cells were incubated in the presence of the produced membranes and they were able to adhere and proliferate, thus revealing the biocompatibility of the photocrosslinked meshes.
- Development of UV cross-linked gelatin coated electrospun poly(caprolactone) fibrous scaffolds for tissue engineeringPublication . Correia, Tiago R.; Ferreira, Paula; Vaz, Rita; Alves, Patrícia; Figueiredo, Margarida; Correia, Ilídio Joaquim Sobreira; Coimbra, PatríciaCardiovascular disease is the leading cause of morbidity and mortality among industrialized countries. Vascular grafts are often required for the surgical treatments. Considering the limitations associated with the use of autografts and with the currently available synthetic materials, a growing demand in tissue engineered vascular grafts has been registered. During the work here described, electrospinning technique was used to prepared fibrous matrices to be applied as vascular implants. For that purpose, electrospun polycaprolactone (PCL) fibrous mats were produced and afterwards coated with different hydrogel formulations based in photocrosslinkable gelatin (GelMA) and the macromers poly(ethylene glycol) acrylate (PEGA) and poly(ethylene glycol) diacrylate (PEGDA). These were further photocrosslinked under UV irradiation using Irgacure® 2959 (by BASF) as the photoinitiator. The suitability of the coated scaffolds for the intended application, was evaluated by assessing their chemical/physical properties as well as their interaction with blood and endothelial cells.
- Sodium hyaluronate/chitosan polyelectrolyte complex scaffolds for dental pulp regeneration: synthesis and characterizationPublication . Coimbra, Patrícia; Alves, Patrícia; Valente, Tiago António Martins; Santos, Rita; Correia, Ilídio Joaquim Sobreira; Ferreira, PaulaIn the present study, small-sized porous scaffolds were obtained from the freeze-drying of sodium hyaluronate/chitosan polyelectrolyte complexes. The obtained materials were characterized by a set of techniques including attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, swelling determination and weight loss studies. The morphology of the scaffolds was observed using scanning electron microscopy. Thermal characterization ofthe scaffolds was also performed by dynamic mechanical thermal analysis and thermogravimetric analysis. Finally, the cytotoxic profile of the prepared scaffolds was evaluated in vitro, using mesenchymal stem cells. The results obtained showed that cells adhered to scaffolds and proliferated. This study also confirmed that the degradation by-products of sodium hyaluronate/chitosan scaffold are noncytotoxic, which is fundamental for its application in the biomedical field.
- Controlled release of moxifloxacin from intraocular lenses modified by Ar plasma-assisted grafting with AMPS or SBMA: An in vitro studyPublication . Pimenta, Andreia; Vieira, Ana Paula; Colaco, Rogério; Saramago, Benilde; Gil, Maria; Coimbra, Patrícia; Alves, Patrícia; Bozukova, Dimitriya; Correia, Tiago R.; Correia, Ilídio Joaquim Sobreira; Guiomar, António; Serro, A.P.Intraocular lenses (IOLs) present an alternative for extended, local drug delivery in the prevention of post-operative acute endophthalmitis. In the present work, we modified the surface of a hydrophilic acrylic material, used for manufacturing of IOLs, through plasma-assisted grafting copolymerization of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) or [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA), with the aim of achieving a controlled and effective drug release. The material was loaded with moxifloxacin (MFX), a commonly used antibiotic for endophthalmitis prevention. The characterization of the modified material showed that relevant properties, like swelling capacity, wettability, refractive index and transmittance, were not affected by the surface modification. Concerning the drug release profiles, the most promising result was obtained when AMPS grafting was done in the presence of MFX. This modification led to a higher amount of drug being released for a longer period of time, which is a requirement for the prevention of endophthalmitis. The material was found to be non-cytotoxic for rabbit corneal endothelial cells. In a second step, prototype IOLs were modified with AMPS and loaded with MFX as previously and, after sterilization and storage (30 days), they were tested under dynamic conditions, in a microfluidic cell with volume and renovation rate similar to the eye aqueous humour. MFX solutions collected in this assay were tested against Staphylococcus aureus and Staphylococcus epidermidis and the released antibiotic proved to be effective against both bacteria until the 12th day of release.
- Preparation and chemical and biological characterization of a pectin/chitosan polyelectrolyte complex scaffold for possible bone tissue engineering applicationsPublication . Coimbra, Patrícia; Ferreira, Paula; Sousa, Hermínio C. de; Batista, Patrícia Sofia Pinhanços; Rodrigues, Miguel; Correia, Ilídio Joaquim Sobreira; Gil, MariaIn this work, porous scaffolds obtained from the freeze-drying of pectin/chitosan polyelectrolyte complexes were prepared and characterized by FTIR, SEM and weight loss studies. Additionally, the cytotoxicity of the prepared scaffolds was evaluated in vitro, using human osteoblast cells. The results obtained showed that cells adhered to scaffolds and proliferated. The study also confirmed that the degradation by-products of pectin/chitosan scaffold are noncytotoxic.