Repository logo
 
Publication

Recolha de Energia Cinéticas das Vibrações Mecânicas em Tubulações de Água

datacite.subject.fosEngenharia e Tecnologia::Engenharia Eletrotécnica, Eletrónica e Informáticapor
dc.contributor.advisorSanto, António Eduardo Vitória do Espirito
dc.contributor.authorBuché, Swellson Enward Barbosa Gomes
dc.date.accessioned2023-05-12T13:13:37Z
dc.date.available2023-05-12T13:13:37Z
dc.date.issued2022-12-14
dc.date.submitted2022-10-10
dc.description.abstractEnergy Harvesting é o processo de recolha e conversão de energia cinética presente no meio ambiente, para esta dissertação, o objetivo principal é aproveitar a energia disponível nas tubulações de água. Usando um transdutor para converter a energia cinética das vibrações para gerar energia elétrica, originada pela passagem de água na tubulação. Um setup experimental recorre a um Woffer para gerar vibração e fazer os testes práticos. Um transdutor piezoelétrico permite converter a energia das vibrações em energia elétrica. A Energy Harvesting Multi-Source Demo Board, Demo Circuit DC2080A, em particular o circuito LTC3588-1, contém uma ponte de retificação de onda completa e um conversor DC/DC buck. A ferramenta Node-red foi importante na implementação dos testes iniciais e monitoramento do comportamento da corrente, tensão e potência geradas. O Mbed-NXP LPC1768 foi utilizado para fazer comunicações entre o Node-red e o sistema montado, o integrado ADXL345 foi o acelerómetro para medir a aceleração do transdutor. O sistema deve ser capaz de fazer recolha da energia cinética das vibrações, convertê-la e disponibilizar para o uso de baixa potência, que nesse caso é um sistema para monitoramento da tubulação de água, fornecendo informações como qualidade da água, pressão com que a água passa pelas tubulações, possíveis furos na tubulação.por
dc.description.abstractEnergy Harvesting is the process of collecting and converting kinetic energy present in the environment, for this dissertation, the main objective is to take advantage of the energy available in water pipes. Using a transducer to convert the kinetic energy of vibrations to generate electrical energy, originated by the passage of water in the pipe. An experimental setup uses a Woffer to generate vibration and carry out practical tests. A piezoelectric transducer allows you to convert vibration energy into electrical energy. The Energy Harvesting Multi-Source Demo Board, Demo Circuit DC2080A, in particular the LTC3588-1 circuit, contains a full-wave rectification bridge and a DC/DC buck converter. The Node-red tool was important in implementing the initial tests and monitoring the behavior of the current, voltage and power generated. The Mbed-NXP LPC1768 was used to make communications between the Node-red and the assembled system, the integrated ADXL345 was the accelerometer to measure the transducer acceleration. The system must be able to collect the kinetic energy of vibrations, convert it and make it available for low power use, which in this case is a system for monitoring the water pipe, providing information such as water quality, pressure at which the water passes through the pipes, possible holes in the pipe.eng
dc.identifier.tid203288149
dc.identifier.urihttp://hdl.handle.net/10400.6/13325
dc.language.isoporpor
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/4.0/
dc.subjectConversor Ac/Dcpor
dc.subjectEnergy Harvestpor
dc.subjectNode-Redpor
dc.subjectRedes de Sensores Sem Fiopor
dc.subjectTransdutor Eletromecânicopor
dc.subjectTransdutor Piezoelétricopor
dc.titleRecolha de Energia Cinéticas das Vibrações Mecânicas em Tubulações de Águapor
dc.typemaster thesis
dspace.entity.typePublication
rcaap.rightsopenAccesspor
rcaap.typemasterThesispor
thesis.degree.name2º Ciclo em Engenharia Eletrotécnica e de Computadorespor

Files

Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
9394_20238.pdf
Size:
1.29 MB
Format:
Adobe Portable Document Format